Equippo sold this machine
from United States to Tunisia

Used 2006 Caterpillar 12H motor grader with moldboard and low profile cab

  • Construction Year: 2006
  • Hour meter: 6693 hrs

This machine is in full running condition

Condition report

  • The following have been inspected and tested good and operational
  • 1) Minor damage to lower radiator grill/lower left cab door
  • 2) Rear glass scratched from missing wiper blade
  • 3) The rear and left lower wiper blades are missing. Some seat adjustments are stiff. The temperature control switch is loose. Could feel temp difference in A/C lines
  • 4) Minor wear in the articulation
  • 5) Damaged steering cyl hose. Some are weathered/cracked. Some appear recent. The blade swing out cylinder is leaking. Rust pitting on end of blade side shift cylinder ram. Minor whine from pump at low RPM until oil warms. Leak at right valve block under cab
  • 6) The valve cover gasket is leaking. Shows 6,633 hours on fuel filters, 6,691 on oil filter
  • 7) Minor cuts and gouges on tires
  • 8) Moldboard cutting edge worked uneven
  • Front tires 25% life remaining
  • Rear tires 25% life remaining

Equipment details

  • scarifier
  • moldboard
  • towbar
  • low profile cabin
  • aircondition
  • 14.00R24 TG tires
  • Caterpillar C9 engine
  • Not CE marked
  • Not EPA marked

Dimensions

  • Height: 3.1 m
  • Width: 2.42 m
  • Length: 8.57 m
  • Weight: 14248 kg

Similar products

Year 2011
Weight 11.0
Hours 6238
USD 138 500
Year 1975
Weight 12.6
Hours 6634
USD 58 000
Year 1992
Weight 12.7
Hours 5423
USD 82 000
Year 2006
Weight 14.7
Hours 12644
USD 139 000
Year 2013
Weight 14.8
Hours 7116
USD 153 500
Year 1996
Weight 15.3
Hours 42413
USD 95 500
Year 1999
Weight 16.3
Hours 17518
USD 76 500
Year 2010
Weight 16.7
Hours 5334
USD 140 500
Year 1997
Weight 18.8
Hours 20349
USD 114 000
Year 2007
Weight 18.8
Hours 9689
USD 144 000
Year 2014
Weight 22.9
Hours 632
USD 261 000
Year 1978
Weight 24.5
Hours 16093
USD 70 500